Stainless Steel SVTR Hardware Kit

**OUR RAILS/ RAIL KITS NOW COME 100 GRIT GARNET MEDIA BLASTED FREE OF CHARGE**
 
All required hardware for the original version of the SVTR.  All Stainless Steel unless otherwise specified.  Kit does not include front trunion bolt (stock mac trunion bolt recommended). If you need the metal rails for the brace, be sure the select the "Hardware w/ Rails" option from the drop down menu.
 
Our rail/ rail kits now come media blasted free of charge! The plates are media blasted in house using 100 grit garnet media as recommended, directly from Cerakote, for proper application and adhesion of coatings. This same grit media is used for our Parkerizing/ Cerakote process, as well as for our AR FCG Reinforcement Plates. This helps to remove any burrs in addition to creating a uniform surface finish. This prepped surface is the perfect base for any coating you plan to use, or leave it raw for a matte textured finish!
 
Hardware Kit includes:
1 - Dowel Pin    -    Feed Ramp
1 - Ender 3 Bed Spring    -    Stock Button (NOT Stainless Steel)
7 - M3 Heat Set Inserts    -    Back Cap & Brace
7 - 16mm M3 Hex Bolts    -    Back Cap & Brace
 
Hardware w/ Rails includes the hardware listed above, in addition to:
2 - 1/8'x1/2" 316 Stainless Steel Laser Cut Bar    -    Stock/ Brace Rails
1 - 1/8'x1/2" 316 Stainless Steel Laser Cut Bar    -    Stock/ Brace Button Rail
 
NOTE: Stainless Steel Rails are laser cut. Dimensions are exact. Some sanding may be required for fitting.